2010 KUBOTA M7040 4X4 LOW HOURS! SOLD
1 of 6
2010 Kubota M7040
4x4
Hydraulic Shuttle Transmission
One rear remote
Quick attach bucket
Advantages
Kubota M7040 Tractor equipped with high performance and affordability combination to bring you a line of tractors that can tackle just about anything you throw at it.
The Kubota M7040 Tractor is best for cutting and baling as well as dairy, cattle and many more applications. Take one for a test drive and you’ll be satisfied.
The Kubota M7040 tractor has a more powerful and smooth hydraulic system. This tractor gives you power, durability, and longevity.
Its lifting capacity at 24in. Behind lift, the point is 1500kg. 3point hitch provides fast and simple attachment of rear-mounted implements, and its pump capacity is 11.0, that’s good for farming operations.
| ENGINE | |
| Type (Make: KUBOTA) | E-CDIS, Direct injected |
| Rated engine RPM ROPS/CAB | 2600 |
| No. of cylinders/Aspiration | 4 / Turbocharged |
| Engine net power* | 71HP / 52.9 KW |
| No. of cylinders/Aspiration | 71HP / 53.0 KW |
| PTO power | 64HP / 47.7 KW |
| Total displacement | 203 cu.in / 3331 |
| Fuel tank capacity ROPS/CAB | 18.5 gal. / 70 liter |
| Alternator ROPS/CAB | 45 Amp on ROPS model, 60 Amp on CAB model, 80 Amp: OPT |
| TRANSMISSION SYSTEM | |
| No. of Speeds | F12 / R12 |
| Main gear shift | Fully synchronized |
| Hydraulic-shuttle | Standard |
| Main clutch type | Multiple wet disc |
| Brake type | Hydraulic wet disc |
| Differential lock (Front / Rear) | Standard |
| 4WD clutch type | Electronic hydraulic on the go |
| Four wheel brakes | Standard |
| PTO | |
| Type | Hydarulic Independent PTO with brake, wet disc. |
| PTO Speed | 540 |
| HYDRAULIC SYSTEM | |
| Pump capacity (3-P hitch) | 11.0gpm, 41.6 L/min. |
| Control system | Position, Draft (top link sensing) and Mixed control |
| 3 Point Hitch | Turn buckle type |
| Category | 1,2(Link ends) |
| Lift capacity at 24in. behind lift point | 1500kg, 3307lbs |
| No. of remote valves | 1 (2nd and 3rd valve optional) |
| TIRE SIZE | |
| Front | 8.0-16 |
| Rear | 12.4-24 |
| DIMENSION & WEIGHT | |
| Wheelbase | 80.7in. / 2050mm |
| Weight | 4806lbs / 2180kg |
| Overall length | 136in / 3450mm |
| Overall height | 89.0in. / 2260mm |
| Overall width | 48.0in / 1220mm |
| Tread Width front | 40.6in. / 11030mm |
| Tread Width rear | 34.4-54.5in(900-1385)mm |
| Turning radius | 11.5ft. / 3.5m |
| Crop Clearance (front axle) | 14.6in. / 370mm |
| LA1153 MODEL | |
| Tractor Applications | M7040 |
| Boom Cylinder Fulcrum | Power position |
| Maximum Lift Height (Pivot Pin) | 2977mm |
| Clearance w/Attachment Dump | 2172mm |
| Reach @ Maximum Height | 811mm |
| Maximum Dump Angle | 60degrees |
| Reach w/Attachment on Ground | 1947mm |
| Maximum Rollback Angle | 43degrees |
| Digging Depth (When Bucket is Level) | 111mm |
| Overall Height in Carry Position | 1573mm |
| Material Bucket Width / Capacity (Heaped) | 0.55 |
| Lift Capacity (Pivot Pin) | 1150kg |
| Raising Time to Full Height w/out Load *1) | 4.7second |
| Lowering time w/out Load (power down) *1) | 3.5second |
| Attachment Rollback Time | 3.0second |
| Attachment Dumping Time | 2.7second |
